Home > Blog > Content

What should be checked during a pre - use inspection of a boom lift?

Jan 07, 2026

What should be checked during a pre - use inspection of a boom lift?

As a reputable boom lift supplier, I understand the critical importance of conducting thorough pre - use inspections of boom lifts. These inspections are not just a formality; they are essential for ensuring the safety of operators and the proper functioning of the equipment. In this blog, I will outline the key aspects that should be checked before using a boom lift.

1. General Visual Inspection

The first step in a pre - use inspection is a general visual check of the entire boom lift. This includes looking for any obvious signs of damage, such as cracks, dents, or leaks.

  • Structural Components: Examine the frame, boom arms, and other structural parts. Cracks in the frame can compromise the stability of the lift, while dents may indicate previous impacts. Check the welds for any signs of cracking or separation. For instance, if there are signs of fatigue around a weld joint on the boom arm, it could lead to a failure during operation.
  • Hoses and Cables: Inspect all hydraulic hoses, electrical cables, and wiring. Look for cuts, abrasions, or bulges in the hoses, which could cause hydraulic fluid leaks. For electrical cables, check for any exposed wires or signs of fraying. A damaged hose can cause a sudden loss of hydraulic pressure, affecting the movement and control of the boom lift.

2. Safety Devices

Safety devices are the lifeline of any boom lift operation. Ensuring that these devices are in proper working condition is non - negotiable.

  • Guardrails: The guardrails on the platform should be securely attached and in good condition. Check for any loose or missing bolts, and ensure that the height and strength of the guardrails meet the safety standards. If the guardrails are not properly installed or damaged, it poses a significant risk of an operator falling from the platform.
  • Safety Harness Anchorage Points: Verify that the safety harness anchorage points are strong and intact. These points are crucial for protecting the operator in case of sudden movements or accidents. Any signs of corrosion or damage to the anchorage points should be addressed immediately.
  • Emergency Stop Buttons: Locate and test all emergency stop buttons. These buttons should be easily accessible and in working order. In an emergency situation, a non - functioning emergency stop button could lead to serious consequences.

3. Hydraulic System

The hydraulic system is responsible for the movement and lifting of the boom lift. A malfunctioning hydraulic system can be extremely dangerous.

  • Fluid Level: Check the hydraulic fluid level in the reservoir. Low fluid levels can cause the hydraulic pump to overheat and may lead to a loss of power. If the fluid level is low, it could indicate a leak in the system, which should be investigated further.
  • Pressure Gauges: Inspect the pressure gauges to ensure they are reading correctly. Abnormal pressure readings can indicate problems with the hydraulic pump, valves, or other components. For example, if the pressure is too high, it could cause damage to the hoses or other parts of the system.
  • Leaks: Look for any signs of hydraulic fluid leaks around the hoses, cylinders, and connections. Even a small leak can lead to a significant loss of pressure over time, affecting the performance of the boom lift.

4. Electrical System

The electrical system controls many of the functions of the boom lift, including the movement of the platform and the operation of lights.

  • Battery: Check the battery terminals for corrosion and ensure they are tightly connected. A weak or dead battery can prevent the boom lift from starting or cause electrical malfunctions. Measure the battery voltage to ensure it is within the recommended range.
  • Switches and Controls: Test all switches, buttons, and controls to ensure they are responsive and functioning correctly. Malfunctioning switches can lead to erratic movements of the boom lift or prevent the operator from controlling the equipment safely.
  • Lights and Signals: All lights, including headlights, taillights, and warning signals, should be checked for proper operation. Lights are important for visibility, especially when operating the boom lift in low - light conditions.

5. Tires and Wheels

The tires and wheels of the boom lift play a crucial role in its mobility and stability.

  • Tire Condition: Examine the tires for wear, cuts, or punctures. Worn - out tires can affect the traction and stability of the boom lift, especially on uneven surfaces. Check the tire pressure and ensure it meets the manufacturer's specifications.
  • Wheel Alignment: Look for any signs of abnormal tire wear, which could indicate problems with wheel alignment. Misaligned wheels can cause the boom lift to veer to one side during operation, increasing the risk of accidents.
  • Brake System: Test the brakes to ensure they are functioning properly. The brakes should be able to hold the boom lift in place securely, both when it is stationary and in operation.

6. Platform and Controls

The platform is where the operator will be working, and the controls are what allow the operator to maneuver the lift.

  • Platform Integrity: Check the platform floor for any signs of damage or weakness. The platform should be able to support the weight of the operator and any tools or materials safely. Inspect the platform gates to ensure they open and close smoothly and lock securely.
  • Control Panel: Review the control panel to ensure all indicators are working correctly. The operator should be able to easily understand and operate the controls. Any error messages or warning lights should be investigated immediately.

7. Operational Testing

After completing the visual and component inspections, it is important to conduct operational tests.

  • Lift and Lowering: Test the boom lift by slowly raising and lowering the platform. Observe the smoothness of the movement and listen for any unusual noises. Any jerks or abnormal sounds could indicate problems with the hydraulic or mechanical systems.
  • Rotation and Extension: Rotate the boom and extend it to its maximum reach (within safe limits). Check for any binding or resistance during these movements. Ensure that the boom returns to its original position smoothly.

In conclusion, a comprehensive pre - use inspection of a boom lift is essential for safe and efficient operation. By following these steps, operators can identify and address potential issues before they become serious problems.

If you are in the market for a high - quality boom lift, we offer a wide range of products, including the Self Propelled Articulating Boom Lift, Self Propelled Telescopic Boom Lift, and Self Propelled Electric Articulating Boom Lift. Our boom lifts are designed to meet the highest safety and performance standards. If you are interested in learning more about our products or would like to discuss your specific requirements, please feel free to reach out to us for a procurement discussion.

IMG_20201217_090207_20241111100229

References

  • OSHA (Occupational Safety and Health Administration) guidelines on aerial lift safety.
  • Manufacturer's operation and maintenance manuals for boom lifts.
Send Inquiry